Stone Tile Cleaning & Restoration Peckham

The initial appearance on a Limestone floor will eventually dull. Surface scratches and stains build up and take off the original shine. Sooner or later, your floor will need to be polished. We use diamond polishing equipment to reinstate the initial gloss.

If the tiles are not even, perfectly even this condition is named "lippage". A Limestone tile floor should be smoothed by grinding off the lippage and irregular tile edges. You need dedicated machinery and several years of experience to grind a Limestone tile floor, however the results are amazing. The floor will look like an individual area of stone.

Following grinding, the tiles will be flush with the grout. A smooth Limestone surface is much simpler mop. A smooth surface Limestone floor does not have grout depessions to capture grime. If your Limestone floor has cracks and chips, we are able to repair them using resin fillers, closely colour matched with the Limestone. The type of restoration needed is going to be based on the condition of of the Limestone floor.

Find outabout our Limestone cleaning Peckham work and also our extensive stone floor cleaning restoration systems or Book your free Quote

Slate is a tremendously popular floor and wall tile because of its low porosity and the many varieties and textures of Slate available. Cleft slate can get a build-up of dirt in the crevices that is hard to remove.

We use a mix of machine scrubbing and hand scrubbing to remove all traces of previous soiled sealers and clean the slate. After professional cleaning we put on hard wearing sealers.

If you like a smooth floor, we can grind the floor, subject into the slate being ideal for grinding.

Discover more about our Slate cleaning and sealing Peckham service as well as our comprehensive stone cleaning  options or Book a Quote

Many Victorian and Edwardian hallways may have floors created from Geometric Encaustic tiles.

Victorian tiles are made from natural clay and have a natural matt finish.

With the variations in residential decor, these kinds of floors come with carpet underlay, lino adhesive, bitumen and additional sticky residues.

Old paint spills, waxes, polishes and sealer remains makes cleaning these types of floors challenging.

After cleaning, a colour intensifying sealer is applied to revive the oroginal colours in the tiles. A topical sealer or wax finish will provide the floor with a low-sheen finish.

Find out moreabout our Victorian Minton Tiles cleaning and sealing Peckham service and our comprehensive professional cleaningtreatments or Book a Quote

Porcelain is classified as a ceramic, but made with alternative ingredients to traditional glazed tiles.

The added minerals helps to make Porcelain much stronger than standard ceramic tiles.

Inferior porcelain has tiny holes which will absorb soil similar to natural stone floors. The tiny surface pits make it tough to remove this soil.

We are able to remove embedded dirt using equipment made to enter into the microscopic pits where the soil is held.

We can help minimize this soil using Porcelain sealers.

If the porcelain is a through-colour, we are able to resurface the porcelain, just like granite or Stone restoration.

Read more about our Porcelain Tiles Cleaning Peckham floor restoration work along with our substantial professional cleaning systems or Book a Quote.

Natural stone cleaning normally will incorporate further restoration services. Natural stone tile restoration addresses many different treatments. At least, all stone floors endure some kind of generic wear and tear. The most typical issue we run across during stone restoration is greasy grime scuffed in to the surface producing a flat, unappealing polish. Highly polished Stone and granite floors show wear and tear fairly quickly, as minute foot traffic scuff marks in the surface alter the luster and trap soil. A surface sealer does not avoid porous natural stone and tiles like Sandstone, Limestone & Terracotta gradually suffering from wear and spill problems.

Most stone and tile floors have cement grout. Grout is generally softer than natural stone stone and tile and much more susceptible to abrasive and chemical damage. Holes can be filled and cracks repaired included in a restoration.

We use resurfacing to eliminate stone finish damage caused by etch marks and scratches.The good thing about natural stone is the fact that it could be resurfaced, to reveal a brand new finish.